Choose Your Size

Width is measured from outside to outside of bottom rail frame.

Stock Width sizes are:

• 12', 18', 20', 22', 24', 26', 28', 30'

• Sizes between stock sizes are priced the same as the next larger stock size.

• If a custom size (special order)is not required you will get you best value by selecting a stock size.

Length is measured by roof panels. Selected Length represents Roof Length

• Frame (base rail) length will be one foot shorter that roof length on Standard style and A-Frame Horizontal.

• A-Frame Vertical roofs the frame and roof may be adjusted one foot shorter than chosen size. Some states will have the 6" overhang so the base rail will be 1' shorter than roof length

Stock Length sizes are:

• Standard Style and A-Frame Horizontal Roofs  21', 26', 31', 36', 41', 46', 51', 56', 61' Note: Horizontal units over 31' may not be available in all areas. You will be notified if your order falls in this catagory.

• Frame/Base rail lengths on Standard Style and A-Frame Horizontal Roofs will be 1' shorter that roof. Example: 26' roof will have a 25' base rail.

• A-Frame Vertical Roof sizes may be adjusted to 20', 25', 30', 35', 40', 45', 50', 55', 60'. Example: If a 31' length is selected it may be adjusted to 30' length because in some states the A-Frame Vertical Roofs do not have a 6" overhang at each end.

• Sizes between stock sizes are priced the same as the next larger stock size.

Height: Height selected represents Leg Height

• Side walls on Standard Style units will be 1' taller than selected Leg Height. Example: If 7' legs are selected the unit will be 8' tall at the wall.

• Side walls on A-Frame Horizontal and A-Frame Vertical will be the same as selected Leg Height.

• Roof pitch is approx 3/12. Example: To estimate peak height divide width by 2 and multiply by 3"

 

NOTE: The builder drawing is for reference only. The number of legs and braces may not represent the number of legs or braces on the unit you have sellected.